HD470 Liquid Nails/Nail-Free Glue (Non-corrosive Adhesive)

Payment Terms:

TT / Letter of Credit( L/C)

FOB Port: Guangzhou

Lead Time:13-15 days

ОБЛАСТЬ ПРИМЕНЕНИЯ:

Свойства продукции:

1. Non-corrosive , It is can be use for easy to be corrupted material such as Mirror and copper material and all Foam Material ect.

2. Have excellent adhesive and good durability between -20℃~+90℃.

3. Moisture-proof, worm proof, anti-crack, mildew proof, non-deforming. No formaldehyde and benzene, no poison and radiation, little odors. Comply with the limit of harmful substances of adhesives environmental standards of GB 18583－2008

4. In certain conditions has sufficient flexibility to allow some board shrinkage or movement, can be repeated bonds within 20min.

5. After complete curing has sufficient shock resistance to allow polish and paint

6. Nail-free, use broadly and conveniently

Назначение:

1.High strength adhesive, Suitable to use indoor and outdoor.

2.Widely use in construction industry, decoration industry, advertising industry and other applications.

3.Bonds building materials such as wood, fiberboard, aluminum composite panel，PU plate ,melamine chipboard plate, particleboard, and variety of wallboard, Ect.

4. Installation of wooden flooring, decorative panels bonding, wallboard or paneling bonding to wood or metal frames, kicking line installation, and other applications

Ограничение применения:

1.Not for unventilated spaces ; not suitable for continuous immersion place; when material surface temperature higher than 40 ℃ or below minus 5 ℃, not for construction.

2. Materials must to be tested before bonding, widely use after achieve the satisfy result.

USE INSTRUCTIONS :

1.Surfaces must be clean and free of impurities, to ensure the materials are fully bonded。

2. Materials must to be tested before bonding, widely use after achieve the satisfy result.

3.Cut the top of cartridge, pierce the inner aluminum film from the top. According to the material area of bonding to cut the injection nozzles slantly for 6mm to 9mm diameter hole, put the injection nozzles on the top of cartridge, and place in cartridge gun.

4. Apply the adhesive to one of the surfaces in either a continuous or spot bead, press surfaces firmly together with a slight twisting motion, then pull surfaces apart, after 30-60 seconds, press surfaces firmly together, until adhesive dried.

5. Large applications require applying the adhesive to both of the surfaces and may require additional bracing until adhesive has dried.

Указание о безопасности:

To keep the construction site ventilation, avoid inhalation of volatile gas in curing process, stored out of reach of children; if accidental eye contact with the uncured adhesive, should be promptly wash with plenty of water and consult a doctor.

Сохранение:

Stored at less than 27 ℃, dry, ventilated, cool place, Keep far away from heat, sparks and naked flames. The storage period is 20 months from the date of production.

★ Color Clear / white

★ 300ML , 24PCS or 25PCS / Carton

Протокол испытаний:

Performance	Standard(JC/T2186-2013,GB18538-2008)	Result
Extrusion,ml/min	>150	305
Solid Content ( non-volatile)%	≥ 60	75.2
Shore Hardness(A)	>40	60
Shear strength (120 hour) MPA	≥1.5	1.95
Dry heat resistant properties	No bubble,No cracking	No bubble,No cracking
VOC Standard GB 18583-2008	Limit of harmful substances of adhesives	Meet standards of GB 18583- 2008

Район продукции

Контакт

Tel：+86 757 83871207
Fax：+86 757 83879884
www.hendersilicone.com
E-mail：info@hendersilicone.com

Компания старается и получила корреляционные сертификаты для обеспечения качества.