1. Beautiful surface with luster, good hardness.

2.Have excellent adhesive and good durability between -20℃~+90℃.

3. Moisture-proof, worm proof, anti-crack, mildew proof, non-deforming. No formaldehyde and benzene, no poison and radiation, little odors. Comply with the limit of harmful substances of adhesives environmental standards of GB 18583－2008.

4. In certain conditions has sufficient flexibility to allow some board shrinkage or movement, can be repeated bonds within 20min.

5. After complete curing has sufficient shock resistance to allow polish and paint.

6. Nail-free, use broadly and conveniently.

1.High strength adhesive, Suitable to use indoor and outdoor.

2. Widely use in construction industry, decoration industry, advertising industry and other applications

3.Bonds building materials such as wood, aluminum, metal, plasterboard, fiberboard, acrylic plate, stone, ceramics, plastic, concrete etc.

4. Installation of wooden flooring, decorative panels bonding, wallboard or paneling bonding to wood or metal frames, kicking line installation, and other applications.

1.Mild corrosivity, not fit for foam, copper, etc. which easy to be corrupted material, For easy to be corrupted material , we recommend HENDER 470 liquid nail (Noncorrosive Adhesive).

2.If use on these material of mirror and foam, have to test and reach using requirement before widely using.

3.Not for unventilated spaces ; not suitable for continuous immersion place; when material surface temperature higher than 40 ℃ or below minus 5 ℃, Not fit for construction.

---

USE INSTRUCTIONS : 

1.Surfaces must be clean and free of impurities, to ensure the materials are fully bonded。

2. Materials must to be tested before bonding, widely use after achieve the satisfy result.

3.Cut the top of cartridge, pierce the inner aluminum film from the top. According to the material area of bonding to cut the injection nozzles slantly for 6mm to 9mm diameter hole, put the injection nozzles on the top of cartridge, and place in cartridge gun.

4. Apply the adhesive to one of the surfaces in either a continuous or spot bead, press surfaces firmly together with a slight twisting motion, then pull surfaces apart, after 2-5mins, press surfaces firmly together, until adhesive dried.

5. Large applications require applying the adhesive to both of the surfaces and may require additional bracing until adhesive has dried.

To keep the construction site ventilation, avoid inhalation of volatile gas in curing process, stored out of reach of children; if accidental eye contact with the uncured adhesive, should be promptly wash with plenty of water and consult a doctor.

Stored at less than 27 ℃, dry, ventilated, cool place, Keep far away from heat, sparks and naked flames. The storage period is 20 months from the date of production.

★ Color white 

★ 300ML , 24PCS or 25PCS / Carton